In the Netherlands they now sell the new CX-3 model 2021 with cylinder deactivation.
In the showroom I checked the Mazda Connect software version number in the most expensive version the "Signature".
It is 74.00.200 EU N
Does anyone have any information about version numbers starting with 74?
Mazda Connect 74.00.200 EU N
Yes 74.00.200 EU N that is the EU/UK version of latest MZD Connect firmware with BT Wireless Carplay.
I believe this firmware will supersede current 70.00.367A EU N.
Unfortunately you must have the BT CMU for wireless to work which is very expensive.
You can see the same firmware in 2021 US Mazda 6 I posted
https://www.mazda3revolution.com/thread ... 775/page-4
I believe this firmware will supersede current 70.00.367A EU N.
Unfortunately you must have the BT CMU for wireless to work which is very expensive.
You can see the same firmware in 2021 US Mazda 6 I posted
https://www.mazda3revolution.com/thread ... 775/page-4
Latest Genuine Mazda MZD-Connect files are now available for free. You must message me as links will no longer be publicly posted.
Mazda Connect Version Update Changes.....
There has been a change in what Version Numbers to now Install and this still also depends on what
Version is currently running in your Mazda today.
Install Procedure...
(All Mazda Models already on Stage 2 .up firmware in use).
IF YOUR MAZDA HAS FIRMWARE VERSION ON or BELOW
55.00.600 NA N for North America, or,
56.00.000 EU N or 4A N for Europe/UK , or Australia, Asia, NZ, Oceania Middle East.
LIKE 31.00.100 or 41.00.000 or 55.00.000 (NA N) or 56.00.000A (EU N or 4A N).
THEN YOU MUST UPDATE with Version Number 70.00.100A First!.
THIS IS A TWO (2) FILE INSTALLATION FOR YOUR REGION or COUNTRY.
70.00.100A-FAILSAFE.UP (First)
Then next Install (one after the other do not remove the USB Flash Drive).
70.00.100A-REINSTALL.UP (Last)
Warning...!!!
DO NOT TURN OFF/ON or START ENGINE BETWEEN THIS
TWO FILE UPDATE, you INSTALL ONE after THE OTHER
DO NOT REMOVE USB FLASH DRIVE.
AFTER INSTALL use YOUR ''CONNECT'' in CAR FOR A FEW MINUTES, THEN SHUTDOWN CAR FOR THE LAST FINAL VERSION TO INSTALL.
Next you MUST do final and last below.....
----------------------------------------------------------
Your FINAL Install Procedure is now Only a 1 (one) File Installation...
(All Mazda Models with .up Firmware use)
IF YOUR MAZDA HAS .up FIRMWARE VERSION ON or ABOVE
55.00.650A (NA N) or the 56.00.100A (EU N or 4A N) or 58.00.310A
or Any 59.00.502A or 59.00.650A,
or Any 70's Firmware like 70.00.021A, 70.00.100A or 70.00.110 or
70.00.150A or 70.00.335C or 70.00.367A or 74.00.230A or 74.00.311A
THEN YES YOU CAN UPDATE Directly to 74.00.324A for LATEST FIRMWARE.
This is now a SINGLE FILE (1) ONLY INSTALLATION for
YOUR REGION or COUNTRY,
MUST USE EITHER ONE of...
NA N_74.00.324A-UPDATE.UP (North America ONLY)
or
EU N_74.00.324A -UPDATE.UP (Europe/UK)
or
4A N_74.00.311A-UPDATE.UP (ADR, AU. NZ, ME, Asia) (74.00.324A 4A N (ADR) is not yet available)
THIS IS THE LATEST GENUINE FIRMWARE CURRENTLY AVAILABLE
FROM MAZDA JAPAN As Of December 30th, 2022.
-----------------------------------------------------------------------------------
ALL 7x.00.xxxx FIRMWARE INCLUDES the Software for
CAR PLAY + ANDROID-AUTO....But...
For the CP/AA CONVERSION TO ACTUALLY WORK IN YOUR MAZDA
You MUST HAVE THE TWO ''GENUINE MAZDA PARTS'' INSTALLED
AFTER any 7X.00.XXXX is installed and or WORKING in YOUR CAR FIRST.
THERE ARE NO SHORT CUTS or OTHER BRAND PARTS...None, DO NOT ASK.
YOU MUST PURCHASE and INSTALL the TWO GENUINE MAZDA PARTS LAST.
DO NOT INSTALL THESE NEW PARTS FIRST or BEFORE ANY 70s FIRMWARE OTHERWISE YOU WILL HAVE TO REMOVE THE NEW PARTS RE-INSTALL THE OLD PARTS AND THEN START AGAIN.
YOU CAN NOT SEPARATE THIS CARPLAY and or ANDROID-AUTO
AS THEY ARE BOTH INSTALLED WITH all 7x.00.xxx FIRMWARE.
CARPLAY and ADROID-AUTO WILL NEVER WORK WITHOUT THE
TWO ''GENUINE MAZDA PARTS'' Finally INSTALLED Last...PERIOD.
There has been a change in what Version Numbers to now Install and this still also depends on what
Version is currently running in your Mazda today.
Install Procedure...
(All Mazda Models already on Stage 2 .up firmware in use).
IF YOUR MAZDA HAS FIRMWARE VERSION ON or BELOW
55.00.600 NA N for North America, or,
56.00.000 EU N or 4A N for Europe/UK , or Australia, Asia, NZ, Oceania Middle East.
LIKE 31.00.100 or 41.00.000 or 55.00.000 (NA N) or 56.00.000A (EU N or 4A N).
THEN YOU MUST UPDATE with Version Number 70.00.100A First!.
THIS IS A TWO (2) FILE INSTALLATION FOR YOUR REGION or COUNTRY.
70.00.100A-FAILSAFE.UP (First)
Then next Install (one after the other do not remove the USB Flash Drive).
70.00.100A-REINSTALL.UP (Last)
Warning...!!!
DO NOT TURN OFF/ON or START ENGINE BETWEEN THIS
TWO FILE UPDATE, you INSTALL ONE after THE OTHER
DO NOT REMOVE USB FLASH DRIVE.
AFTER INSTALL use YOUR ''CONNECT'' in CAR FOR A FEW MINUTES, THEN SHUTDOWN CAR FOR THE LAST FINAL VERSION TO INSTALL.
Next you MUST do final and last below.....
----------------------------------------------------------
Your FINAL Install Procedure is now Only a 1 (one) File Installation...
(All Mazda Models with .up Firmware use)
IF YOUR MAZDA HAS .up FIRMWARE VERSION ON or ABOVE
55.00.650A (NA N) or the 56.00.100A (EU N or 4A N) or 58.00.310A
or Any 59.00.502A or 59.00.650A,
or Any 70's Firmware like 70.00.021A, 70.00.100A or 70.00.110 or
70.00.150A or 70.00.335C or 70.00.367A or 74.00.230A or 74.00.311A
THEN YES YOU CAN UPDATE Directly to 74.00.324A for LATEST FIRMWARE.
This is now a SINGLE FILE (1) ONLY INSTALLATION for
YOUR REGION or COUNTRY,
MUST USE EITHER ONE of...
NA N_74.00.324A-UPDATE.UP (North America ONLY)
or
EU N_74.00.324A -UPDATE.UP (Europe/UK)
or
4A N_74.00.311A-UPDATE.UP (ADR, AU. NZ, ME, Asia) (74.00.324A 4A N (ADR) is not yet available)
THIS IS THE LATEST GENUINE FIRMWARE CURRENTLY AVAILABLE
FROM MAZDA JAPAN As Of December 30th, 2022.
-----------------------------------------------------------------------------------
ALL 7x.00.xxxx FIRMWARE INCLUDES the Software for
CAR PLAY + ANDROID-AUTO....But...
For the CP/AA CONVERSION TO ACTUALLY WORK IN YOUR MAZDA
You MUST HAVE THE TWO ''GENUINE MAZDA PARTS'' INSTALLED
AFTER any 7X.00.XXXX is installed and or WORKING in YOUR CAR FIRST.
THERE ARE NO SHORT CUTS or OTHER BRAND PARTS...None, DO NOT ASK.
YOU MUST PURCHASE and INSTALL the TWO GENUINE MAZDA PARTS LAST.
DO NOT INSTALL THESE NEW PARTS FIRST or BEFORE ANY 70s FIRMWARE OTHERWISE YOU WILL HAVE TO REMOVE THE NEW PARTS RE-INSTALL THE OLD PARTS AND THEN START AGAIN.
YOU CAN NOT SEPARATE THIS CARPLAY and or ANDROID-AUTO
AS THEY ARE BOTH INSTALLED WITH all 7x.00.xxx FIRMWARE.
CARPLAY and ADROID-AUTO WILL NEVER WORK WITHOUT THE
TWO ''GENUINE MAZDA PARTS'' Finally INSTALLED Last...PERIOD.
Latest Genuine Mazda MZD-Connect files are now available for free. You must message me as links will no longer be publicly posted.
-
- Posts: 1
- Joined: Fri Mar 24, 2023 11:41 am
Hey,
I am a resident of the UK.
I have a Mazda 3 Skyactiv Fastback 2014. (VIN - JMZBM622611121708).
I'm looking to update the OS on the vehicle. I noticed my firmware is below the number 31..., it's on 29...
You say there are two updates, and the first update must be done to avoid any damages.
Please can you supply me with these updates, and also state which to do first?
I'm sure I need the failsafe and update packages for 31...
I'd appreciate your assistance with this.
Kindest regards
Lewis
I am a resident of the UK.
I have a Mazda 3 Skyactiv Fastback 2014. (VIN - JMZBM622611121708).
I'm looking to update the OS on the vehicle. I noticed my firmware is below the number 31..., it's on 29...
You say there are two updates, and the first update must be done to avoid any damages.
Please can you supply me with these updates, and also state which to do first?
I'm sure I need the failsafe and update packages for 31...
I'd appreciate your assistance with this.
Kindest regards
Lewis
Mazda don't release the OS update files to the general public. It's supposed to be a 'dealer only' provided service. However, ASH8 can probably provide you with a link to the files he has if you send him a Private Message over at Mazda3Revolution forums where he hangs out most of the time - read this thread - https://www.mazda3revolution.com/thread ... st-2536817
If you’re a new member on those forums you need to post a couple of simple replies or add some new posts there before you can send a Private Message (PM) due to their forum setup restrictions.
Julian.
Sept 2015 CX-3 Sport Nav, Dynamic Blue Mica, 1.5 Diesel, AWD, Automatic, (81500 miles @ 04/24)
https://www.jtonline.info
Please add year of registration, model info., and location to your CX-3 Forums profile.
Sept 2015 CX-3 Sport Nav, Dynamic Blue Mica, 1.5 Diesel, AWD, Automatic, (81500 miles @ 04/24)
https://www.jtonline.info
Please add year of registration, model info., and location to your CX-3 Forums profile.
Greetings to all dear members!
I'm new to the forum and I'm interested in the CMU update. In my country, brand services charge a brutal amount for cars, I know it's a business, but there is a limit to everything. I will do what I can and can do on my car.
I'm new to the forum and I'm interested in the CMU update. In my country, brand services charge a brutal amount for cars, I know it's a business, but there is a limit to everything. I will do what I can and can do on my car.